Version 0.7.2 – New device profiles for Adam Equipment scales

Version 0.7.2 of our data logging software includes tested* device profiles for the following scales made by Adam Equipment:

  • CBK, *GBK, GFK (GK indicator): We recommend setting “C8 LAb” to “off” in the menu of your scale, particularly if you’re using continuous transmission mode “Ct StA” oder “Ct AnY”).
  • *CPWplus: Set the scale to “trn 2” for continuous transmission or to “trn 3” to use polling (or the print button on the scale).
  • GBC, GFC (GC counting indicator): You can choose to capture the weight or the number of pieces. *We’ll receive a GBC counting scale later this week for tests.

Adam Equipment Scales

These new profiles make it easy to set the default RS-232 parameters and the command to poll the weight: simply press the “Set default…” buttons (available in the Device and Timer tabs):

Poll weight from Adam Equipment scale using timer

Please note that our software works with most scales and balances even if no pre-defined device profile is available yet: choose “Generic measuring instrument” and set the interface parameters and the polling command manually (your device manual should contain the necessary information). If required, you can also customize the regular expression SDL uses to match and capture data. Further information is available in our documentation.

If you’re a manufacturer and would like us to to include your measuring instruments, please contact us and send us the necessary information (or devices for testing):

  • RS-232 interface parameters and/or default IP port number.
  • Data format, including the terminator/delimiter (data has to be sent as ASCII, but we will need a precise description of the format so that we can can capture the measuring value).
  • Available device modes (e.g. manual transmission, automatic transmission on stability or in intervals, continuous transmission, command mode, etc.).
  • Polling command (which tells the instrument to send the measuring value immediately; weighing instruments should send the net weight).

Version 0.6.0 – Polling

As of version 0.60, Simple Data Logger can send a user-defined command to the connected device to trigger a response (which is then recorded). The command is automatically repeated by a precise timer. Alternatively, SDL can also synchronize the command and the response, either adding a delay or polling the device as fast as possible.

Polling

To read more about the new polling functionality available in the timer tab, please consult our documentation.

We’ve also made sure that the list of COM ports in the device tab is now sorted in logical order (COM1, COM2… COM10).